RDX AWD L4-2.3L Turbo (2010)
Fluid Pressure Sensor/Switch: Service and Repair
Transmission Fluid Pressure Switch A (2nd Clutch) Replacement
Transmission Fluid Pressure Switch A (2nd Clutch) Replacement
1. Do the battery removal procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
2. Remove the charge air cooler cover See: Powertrain Management/Fuel Delivery and Air Induction/Turbocharger/Intercooler/Service and Repair.
3. Remove the air cleaner See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair.
4. Remove the battery base See: Engine, Cooling and Exhaust/Engine/Service and Repair/Engine Removal.
5. Remove the air bypass outlet pipe (A).
6. Disconnect the transmission fluid pressure switch A (2nd clutch) connector, and remove the switch (A).
7. Install a new transmission fluid pressure switch A (2nd clutch) and a new sealing washer (B), and tighten the switch.
