RDX AWD L4-2.3L Turbo (2010)
13. Remove the 6.0 mm (0.24 in) pin that was installed to hold the shift lever.
14. Turn the ignition switch to ON (II). Move the shift lever to each position, and check that the A/T gear position indicator follows the transmission
range switch.
15. Shift to P, and check that the shift lock works properly. Push the shift lock release, and check that the shift lever releases, and also check that the
shift lever locks when it is shifted back to P.
16. Reinstall the center console panel See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Removal/Installation, and driver's console cover See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
and Replacement/Center Console Removal/Installation.
