RDX AWD L4-2.3L Turbo (2010)
Shifter A/T: Removal and Replacement
A/T Shift Lever Boot and A/T Gear Position Indicator Panel Replacement
A/T Shift Lever Boot and A/T Gear Position Indicator Panel Replacement
1. Remove the shift lever See: A/T Shift Lever Removal.
2. Remove the shift lever knob, shift lever knob cover, and shift lever button ring See: A/T Shift Lever Knob, Shift Lever Knob Cover, and Shift
Lever Button Ring Replacement.
3. Remove the A/T gear position indicator panel light socket from the A/T gear position indicator panel, and remove the A/T gear position indicator
panel/shift lever boot assembly.
4. Release the lock tabs retaining the shift lever boot using a screwdriver.
5. Replace the shift lever boot or A/T gear position indicator panel, and install the boot in the indicator panel.
6. Install the A/T gear position indicator panel/shift lever boot assembly.
7. Install the indicator panel light socket in the A/T gear position indicator panel, and install the harness in its clamp.
