RDX AWD L4-2.3L Turbo (2010)
Shifter A/T: Testing and Inspection
Paddle Shifter + (Upshift Switch) Circuit Troubleshooting
Paddle Shifter + (Upshift Switch) Circuit Troubleshooting
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair in
the SRS before doing repair or service.
1. Remove the steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering Wheel
Removal.
2. Check for continuity between cable reel subharness 20P connector terminals No. 8 and No. 16 when pressing and releasing the paddle shifter +
(upshift switch).
Is there continuity while pressing the paddle shifter + (upshift switch) and no continuity when the paddle shifter + (upshift switch) is released?
YES -
Go to step 5.
NO -
Go to step 3.
3. Disconnect the paddle shifter + (upshift switch) connector.
4. Check for continuity between the paddle shifter + (upshift switch) connector terminals when pressing and releasing the paddle shifter + (upshift
switch).
