RDX AWD L4-2.3L Turbo (2010)
Differential Temperature Sensor/Switch: Service and Repair
Rear Differential Fluid Temperature Sensor Replacement
1. Drain the differential fluid, and reinstall the drain plug with a new sealing washer See: Service and Repair/Removal and Replacement/Rear
Differential Fluid Inspection and Replacement.
2. Remove the rear differential fluid temperature sensor cover (A) and the rear differential fluid temperature sensor harness bracket D, then
disconnect the rear differential fluid temperature sensor 2P connector (B).
3. Remove the rear differential fluid temperature sensor (C).
4. Install the rear differential fluid temperature sensor with a new O-ring (E) in the reverse order of removal.
5. Refill the differential with the recommended fluid See: Service and Repair/Removal and Replacement/Rear Differential Fluid Inspection and
Replacement.
