RDX AWD L4-2.3L Turbo (2010)
Axle Shaft Assembly: Removal and Replacement
Driveshaft Dynamic Damper Replacement
Driveshaft Dynamic Damper Replacement
1. Remove the inboard joint See: Overhaul/Front Driveshaft Disassembly.
2. Remove the dynamic damper band See: Overhaul/Front Driveshaft Disassembly.
3. Remove the dynamic damper (A).
4. Install a new dynamic damper.
5. Adjust the specified distance (A) between the outboard joint side and the dynamic damper edge.
6. Install the dynamic damper band See: Overhaul/Front Driveshaft Reassembly.
7. Install the inboard joint See: Overhaul/Front Driveshaft Reassembly.
