RDX AWD L4-2.3L Turbo (2010)
4. Press the wheel bearing (A) out of the knuckle (B) using the attachment, the driver handle, and a press.
5. Wash the knuckle and hub thoroughly in high flash point solvent before reassembly.
6. Press a new wheel bearing (A) into the knuckle (B) using the old bearing (C), a steel plate (D), the attachment, the support base, and a press.
NOTE:
-
Install the wheel bearing with the wheel speed sensor magnetic encoder (E) (brown color), toward the inside of the knuckle.
-
Remove any oil, grease, dust, metal debris, and other foreign material from the encoder surface.
-
Keep all magnetic tools away from the encoder surface.
-
Be careful not to damage the encoder surface when you insert the wheel bearing.