RDX AWD L4-2.3L Turbo (2010)
Repair/Rear Brake Disc Replacement.
8. With SH-AWD: Remove the flange bolts (A), and remove the hub bearing unit (B) by tapping the driveshaft end (C) with a soft face hammer
while drawing the hub bearing unit outward.
9. Without SH-AWD: Remove the hub bearing unit (A) and the O-ring (B).
10. Without SH-AWD: Remove the rear axle shaft (A) from the hub bearing unit (B) with a soft face hammer while drawing the hub bearing unit
outward.
11. Check the rear hub bearing unit for damage and cracks.