RDX AWD L4-2.3L Turbo (2010)
Flex Plate: Service and Repair
Drive Plate Removal and Installation
1. Remove the transmission assembly See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic
Transmission Removal.
2. Remove the drive plate (A) and washer (B) from the engine crankshaft.
3. Install the drive plate and washer on the engine crankshaft, and tighten the eight bolts in a crisscross pattern in at least two steps.
4. Install the transmission assembly See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Installation.