RDX AWD L4-2.3L Turbo (2010)
17. Install the 8 x 53 mm ATF joint pipe (A) with the filter end into its mounting hole (B).
18. Check the height (A) of the 8 x 53 mm ATF joint pipe (B) between the top (C) of the pipe and solenoid valve body mounting surface (D). The
height is about 7 mm (0.3 in). If the height is over 7 mm (0.3 in), push the pipe until it bottoms in the accumulator body.
19. Install a new gasket (A) on the transmission housing, and install the 8 x 34.5 mm ATF joint pipe (B) with the filter end into the transmission
housing and the 8 x 25.2 mm ATF pipe (D).