RDX AWD L4-2.3L Turbo (2010)
Front Door Window Regulator: Service and Repair
Front Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Panel
Removal/Installation.
2. Disconnect the power door lock actuator connector (A), and remove the plug caps (B).
3. Detach the connector clip (C), and pass the wire harnesses (D) through the slit (E) in the plastic cover (F), then remove the plastic cover.
NOTE: If the plastic cover is damaged or torn, replace it.
4. Carefully raise the glass (A) until you can see the bolts, then remove them. Carefully pull the glass out through the window slot. Take care not to
drop the glass inside the door.