RDX AWD L4-2.3L Turbo (2010)
Windshield Washer Reservoir: Service and Repair
Washer Motor/Reservoir Replacement
1. Remove the right inner fender See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Inner Fender Replacement
.
2. Disconnect the 2P connector (A) from the washer motor (B).
3. Remove the washer motor and grommet (C) from the reservoir, then disconnect the windshield washer tube (D) and the rear window washer tube
(E).
4. Remove the clips and bolts, then remove the washer reservoir.
5. Install the parts in the reverse order of removal.
