RDX AWD L4-2.3L Turbo (2010)
6. Remove the nut (A) and the link (B) from the wiper motor (C).
7. Remove the three bolts (D), and the wiper motor from the wiper linkage assembly (E).
Installation
1. Before installing the motor, plug it in, then turn the wiper/washer switch to (LO) or (HI) ON, then OFF to return the motor shaft to the park
position.
NOTE:
-
Does not use the wiper/washer switch (INT) position in this step.
-
If necessary, replace any damaged clips.
-
Apply multipurpose grease to the moving parts.
2. Install the wiper motor (A) and link (B) to the wiper linkage assembly (C).