RL V6-3.5L (2007)
2. Put the level (A)(commercially available) on the aiming pad (B) of the millimeter wave radar unit.
3. Turn the vertical adjusting bolt (C) on the driver's side with a screwdriver, and adjust the angle of millimeter wave radar unit so that the air bubble
in the level is centered.
Horizontal Aiming
1. Park the vehicle on level ground with at least this much open space around it: 32.8 ft (10 m) in front, 13.1 ft (4 m) in width, and 4.9 ft (1.5 m) in
height.
2. Make sure there are no reflecting objects or anything in this range.
3. Check the tire pressures, and adjust the pressures to the specified value if need.
4. Put a person or an object equivalent to the driver's weight in the driver's seat.
Setting the Distance between the Target and the Vehicle
NOTE: When marking on the floor, use suitable tape to mark the exact locations.
5. Hang the plumb bob from the center line on the jacking pad (A) under the front of the vehicle (line up the plumb bob with the line on the jacking
