RL V6-3.5L (2007)
NOTE: If DTC 61 or DTC 62 is indicated, troubleshoot the indicated DTC first.
11. Start the engine.
12. Turn the adaptive cruise control (ACC) switch (A) on.
13. Select ADAPTIVE CRUISE CONTROL (ACC) from DRIVING SUPPORT menu. Select RADAR AIMING from ADJUSTMENT menu, the
MID will indicate the number "4" on its display for 2 seconds then display "NO TARGET".
14. Make sure the MID indicates "NO TARGET" on its display.
NOTE: When the radar is aimed correctly the MID indicates "NO TARGET". If this is not indicated there is an unwanted radar reflection in front
of the vehicle in the range of the radar.
Special Tools Set-up
15. Assemble the radar aimer set components
