RL V6-3.5L (2007)
The normal warranty applies.
Failed Part:
72184-SJA-J11ZC
Defect Code:
06201
Symptom Code:
01201
Skill Level:
Repair Technician
REPAIR PROCEDURE - FRONT DOOR HANDLE
NOTE:
Put on gloves to protect your hands.
^
Use the appropriate tool from the KTC trim tool set to avoid damage when prying parts
^
Take care not to scratch or damage the door panel or other interior trim pieces.
1. Fully raise the front door glass.
2. Using a trim tool, push on the bottom hook and pivot the cover on the upper hooks, detach the front hook, then remove the cover and the screw
securing the inner handle.
3. Using a trim tool, pull the top edge of the pocket light cover out to release the hooks and the cover, then remove the screw.
4. Using a trim tool, pry out the notch of the grip cover to detach the hook, pull out the cover to release the remaining hooks, then remove the cover
from the grip.
5. Remove the door panel with as little bending as possible to avoid creasing or breaking it.
^
Release the clips that secure the door panel with a commercially available trim pad remover.
