RL V6-3.5L (2007)
9. Remove the screws, then remove the grip/armrest (A) and the wood trim (B) from the door panel (C).
10. Remove the screws (A, B), then separate the door grip (C), the armrest (D), the power window switch panel (E), the grip bracket (F), and the
power window switch (G).
11. Install the door panel in the reverse order of removal, and note these items:
-
Replace any damaged cable fasteners with new ones.
-
Make sure the connectors are plugged in properly, and the cable is connected properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.
-
When replacing, the latch cable (A) should be fixed to the cable fastener (B) with the latch in lock position as shown.
-
Make sure the window and power door lock operate properly.
