RL V6-3.5L (2007)
12. Install the door panel in the reverse order of removal, and note these items.
-
Replace any damaged cable fasteners with new ones.
-
Before reinstalling the door panel, install the clips.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.
-
When replacing, the latch cable (A) should be fixed to the cable fastener (B) with the latch in lock position as shown.
-
Make sure the connector is plugged in properly, and the cable is connected properly.
-
Make sure the window and power door lock operate properly.