RL V6-3.5L (2007)
Fuel Door Latch: Service and Repair
Fuel Fill Door Latch/Actuator Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the rear bumper.
1. Remove the left trunk side trim panel.
2. Remove the fuel door latch/actuator (A).
1. Remove the fuel door latch by turning it 90 degrees from the body.
2. Disconnect the actuator connector (B).
3. Loosen the screws, then remove the actuator (C) by sliding it forward.
3. Install the rear fuel door latch/actuator in the reverse order of removal, and note these items:
-
Apply multipurpose grease to the hood latch as indicated by the arrows.
-
Make sure the door opens properly and locks securely.
