RL V6-3.5L (2007)
Hood Latch Release Cable: Service and Repair
Hood Opener Cable Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body and related parts.
1. Remove these items:
-
Upper grille cover
-
Headlight, left side
-
Radiator tank, as needed
-
Front inner fender, left side as necessary
-
Kick panel, left side
2. Disconnect the hood opener cable (A) from the hood latch (B)
3. Using a clip remover, detach the clips (C), and remove the grommet (D) from the body, then remove the hood opener cable from the vehicle. Take
care not to kink the cable.
4. Install the cable in the reverse order of removal.
NOTE: Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
