RL V6-3.5L (2007)
Trunk / Liftgate Switch: Service and Repair
Main Switch Test/Replacement
Main Switch Test/Replacement
1. Remove the glove box housing.
2. Carefully push the-main switch (A) out from behind the glove box housing.
3. Disconnect the 2P connector (B) from the main switch.
4. Check for continuity between the No. 1 and No. 2 terminals.
-
With the main switch ON, there should be continuity.
-
With the main switch OFF, there should be no continuity.
5. If the continuity is not as specified, replace the main switch.
