RL V6-3.5L (2007)
Front Fender Liner: Service and Repair
Front Inner Fender
Front Inner Fender Replacement
Special Tools Required
Push pin puller 07AAC-SJAA100
NOTE:
-
Use the special tool to remove the clips.
-
Take care not to scratch the body.
1. Remove the front inner fender (A).
1. Remove the screws (B) from the rear of the front wheel arch, then remove the splash guard (C) (Canadian model).
2. From under the front bumper (D), remove the bolts (E) securing the front bumper, splash shield (F), and front inner fender, and remove the clip
(G) securing the front bumper and front inner fender.
3. From the wheel arch, remove the clips (H, I) securing the front inner fender (and splash shield) to the body.
4. Release the hook (J) of the splash shield, then remove the front inner fender.
2. Install the inner fender in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.
