RL V6-3.5L (2007)
Grille: Service and Repair
Lower Grille
Lower Grille Replacement
Special Tools Required
Push pin puller 07AAC-SJAA100
NOTE:
-
Take care not to scratch the front bumper.
-
Put on gloves to protect your hands.
1. Remove the front bumper.
2. Remove the lower grille (A).
1. Release the headlight washer tube (B) from the hooks (C) on the lower grille.
2. Detach the clips (D) from the front bumper.
3. Remove the outside temperature sensor clip (E) and wire clip (F) from the lower grille.
4. Release all of the hooks (G), and then remove the lower grille from the bumper (H) by lifting it up.
3. Install the front bumper lower grille in the reverse order of removal. Push the hooks into place securely.
