RL V6-3.5L (2007)
4. Remove the bolts, then remove the rear vent duct C (A).
5. Detach the clips on both sides of the carpet (A). Pull the fastener (B) out, and pull out the carpet from under the plate (C), then remove the carpet.
6. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle or twist the carpet.
-
Make sure the seat harnesses and antenna lead are routed correctly.
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
