RL V6-3.5L (2007)
Trim Panel: Service and Repair
Trim Removal/Installation - Door Areas
Trim Removal/Installation - Door Areas
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
Front Door Sill Area
NOTE:
-
Put on gloves to protect your ha rids.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Detach the hooks (A) and tabs B) from the kick panel (C) and B-pillar lower trim (D), and pull the front door sill trim (E) up by hand to detach the
clips (F), then remove it from the front door opening trim (G).
2. If necessary, pull the front side outer trim (H) up to detach the clips (I), then remove the trim.