RL V6-3.5L (2007)
Utility Storage Compartment: Service and Repair
Utility Pocket Housing
Utility Pocket Housing Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the trim and panels.
1. Remove the center trim.
2. Remove the screws.
3. Gently pull out along the top of the utility pocket housing (A) to release the clips, then lower the front side down to release the pins (B) from the
select lever bracket (C).
