RL V6-3.5L (2007)
9. Install the slider and cable assembly in the reverse order of removal, and note these items:
-
Damaged parts should be replaced.
-
Apply molybdenum grease to the glass bracket (A) and guide rail portion of the frame (B) indicated by the arrows.
-
Before reinstalling the motor, make sure both link lifters are parallel, and in the fully closed position.
-
Before reinstalling the motor, slide both drain channel sliders (C) rearward fully until the slider portions of the inner cable contact the slide
stops (D) on the guide rail to slide both drain channel sliders.
-
Before reinstalling the motor, install the frame and glass, then check the opening drag.
-
After reinstalling the motor, do the moonroof calibration.
