RL V6-3.5L (2007)
Sunroof / Moonroof Drain: Service and Repair
Drain Channel
Drain Channel Replacement
1. Remove the glass.
2. With the moonroof wrench, move both glass brackets (A) to the position where the moonroof normally tilts up and disconnect the drain channel
rods (B) from the joint bushings (C) on both sides.
NOTE: Check the bushing for damage, and replace if necessary.
3. Slide the drain channel (A) forward.
4. Pull the rear edge of the drain channel (A) up while pushing both clips (B), and release the channel from both hooks (C) of the drain channel slider
by pulling it rearward.
5. Remove the drain channel.