RL V6-3.5L (2007)
Seat Cover: Service and Repair
Front Seat-Back Cover
Front Seat-back Cover Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to tear the seams of damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the seat-back.
2. Remove the head restraint.
3. Detach the clips and hooks (A) By pulling the bottom of the back panel (B) back, then gently pull down the panel to release the hooks (C) from the
seat-back frame, and remove the panel.
4. Release the hooks (A), then loosen the seat-back cover (B).
