RL V6-3.5L (2007)
Trunk / Liftgate Switch: Service and Repair
Trunk Lid Outer Handle Switch Test/Replacement
Trunk Lid Outer Handle Switch Test/Replacement
1. Open the trunk lid, and remove the trunk lid trim.
2. Disconnect the 3P connector (A) from the trunk lid outer handle switch (B).
3. Check for continuity between the No. 2 and No. 3 terminal.
-
With the handle pulled, there should be continuity.
-
With the handle released, there should be no continuity.
4. If the continuity is not as specified, remove the two bolts and replace the switch.
