RL V6-3.5L (2007)
Brake Caliper: Removal and Replacement
Front/Removal
Front Brake Pad Inspection and Replacement
Special Tools Required
Brake caliper piston compressor 07AAE-SEPA101
CAUTION: Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.
^
Avoid breathing dust particles.
^
Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
Replacement
NOTE: Due to the high performance nature of the brake system, the rotors and pads may wear faster. Be sure to inspect the front rotor thickness
anytime the front pads are replaced.
1. Remove some brake fluid from the master cylinder.
2. Raise the front of the vehicle, and support it with safety stands in the proper locations.
3. Remove the front wheels.
4. Turn and twist out the clip (A) from the caliper hole (B), and pull the clip out from the pad pins (C).
5. Remove the pad pins (A) and the pad spring (B).
6. Remove the pad.