RL V6-3.5L (2007)
13. * Coat the piston with a thin layer of the grease supplied in the kit, then reinstall the piston into the master cylinder.
NOTE
* Make sure you insert the end of the piston with the holes into the master cylinder.*
14. Reinstall the master cylinder.
^ Use a new 0-ring coated with clean brake fluid.
^ Torque the mounting nuts to 13 Nm (9.4 lb-ft).
*NOTE:
Do not overtighten the mounting nuts.*
^ Torque the brake line nuts to 22 Nm (16 lb-ft).