RL V6-3.5L (2007)
6. Make sure the parking brakes are fully applied when the parking brake pedal is pressed all the way.
Major Adjustment (to be done when replacing parking brake shoes and after lining surface break-in)
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
2. Release the parking brake pedal fully.
3. Back off the adjusting nut (A) in the parking brake pedal.
4. Remove the rear wheels.
5. Remove the access plug (A).
6. Turn the ratchet teeth (B) on the adjuster assembly (C) with a flat-tip screwdriver (D) until the shoes lock against the parking brake drum. Then
back off the adjuster 12 clicks, and install the access plug.
7. Do the minor adjustment procedure.
8. Install the rear wheels.
