RL V6-3.5L (2007)
Vacuum Brake Booster: Service and Repair
Brake Booster Replacement
1. Remove the master cylinder.
2. Disconnect the vacuum hose (A) from the brake booster (B).
3. Remove the engine wire harness (A) from the harness brackets (B), and move the engine wire harness aside.
4. Loosen the yoke nut (A), then remove the lock pin (B) and the joint pin (C).
5. Remove the brake booster mounting nuts (D) and the yoke (E).
6. Twist the brake booster (A) forward while pulling out.