acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Coolant Drain Plug, Cylinder Block > < Cooling System|Capacity Specifications|Page 2974
Page 2
background image

9. Pour Acura Long Life Antifreeze/Coolant Type 2 into the radiator up to the base of the filler neck.

NOTE: Always use Acura Long Life Antifreeze/Coolant Type 2 (P/N OL999-9011A). Using a non-Acura coolant can result in corrosion, causing
the cooling system to malfunction or fail. Acura Long Life Antifreeze/Coolant Type 2 is a mixture of 50% antifreeze and 50% water. Do not add
water.

10. Install the radiator cap loosely.
11. Start the engine and let it run until it warms up (the radiator fan comes on at least twice).
12. Turn off the engine. Check the level in the radiator and add Acura Long Life Antifreeze/Coolant Type 2, if needed.
13. Put the radiator cap on tightly, then run the engine again, and check for leaks.
14. Clean up any spilled engine coolant.

Coolant Drain Plug, Cylinder Block > < Cooling System|Capacity Specifications|Page 2974