RL V6-3.5L (2007)
REAR
1. Remove the timing belt.
2. Remove the rocker arm assembly.
3. Remove the rear camshaft pulley.
4. Remove the two nuts securing the purge joint.
5. Remove the thrust cover (A), then remove the rear camshaft (B).
6. Install the rear camshaft in the reverse order of removal. Always use a new O-ring (C). Apply new engine oil to the journals and camshaft lobes.
7. Apply new engine oil to the threads of the camshaft pulley mounting bolt, then install the rear camshaft pulley.
8. Install the rocker arm assembly, then tighten the mounting bolts.
9. Install the timing belt.
10. Adjust the valve clearance.
11. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure.
