RL V6-3.5L (2007)
Timing Belt: Service and Repair
Timing Belt Removal
Timing Belt Removal
1. Remove the right upper fender trim.
2. Turn the crankshaft so its white mark (A) lines up with the pointer (B).
3. Check that the No. 1 piston top dead center (TDC) mark (A) on the front camshaft pulley and the pointer (B) on the front upper cover are aligned.
4. Remove the right front wheel.
5. Remove the splash shield.
6. Remove the drive belt.
7. Remove the drive belt auto-tensioner.
