RL V6-3.5L (2007)
Evaporator Core: Service and Repair
Evaporator Core Replacement
1. Recover the refrigerant with a recovery/recycling/charging station.
2. Remove the engine cover.
3. Remove the bolt, then disconnect the Ale lines (A) from the evaporator core.
4. Remove the blower unit.
5. Remove the self-tapping screws and the expansion valve cover (A), then remove the bolts and the expansion valve (B) without bending the lines.
6. Disconnect the connectors (A) from the power transistor and control motor relay, then remove the joint duct (B).
