RL V6-3.5L (2007)
9. Measure resistance between the No. 1 and No. 2 terminals of the fuel pump 5P connector with the float at E (EMPTY), LOW (LOW FUEL
INDICATOR), and F (FULL) positions.
-
If you do not get the following readings, replace the fuel gauge sending unit.
-
If the fuel gauge sending unit test is OK, do the secondary fuel gauge sending unit test.
NOTE: Remove the No. 15 BACK UP (40 A) fuse from the under-hood fuse/relay box for at least 30 seconds after completing troubleshooting,
otherwise it may take up to 20 minutes for the fuel gauge to indicate the correct fuel level.
