RL V6-3.5L (2007)
When checking voltage or resistance on this type of connector the first time, you must remove the retainer (A) to insert the tester probe from the wire
side.
NOTE: It is not necessary to reinstall the removed retainer; the terminals will stay locked in the connector housing.
To remove the retainer (A), insert a flat-tip screw driver (B) between the connector body and the retainer, then carefully pry out the retainer. Take care
not to break the connector.
Seats with Side Airbags
Seats with side airbags have a "SIDE AIRBAG" label on the seat-back.
-
When cleaning, do not saturate the seat with liquid. Do not spray steam on the seat.
-
Do not repair a torn or frayed seat-back cover; replace it.
-
After a collision in which the side airbag was deployed, replace the seat-back cover and side airbag with new parts. If the seat-back cushion is
split, it must be replaced. If the seat-back frame is deformed, it must be replaced.
-
Never put after market accessories on the seat (covers, pads, seat heaters, lights, etc.),
Disconnecting System Connectors