RL V6-3.5L (2007)
Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message "SERVICE OIL LIFE" along with "5%" and the
maintenance item code(s) are displayed on the lower part of the multi-information display when the calculated engine oil life is 1 to 5 percent.
The maintenance item code or codes indicate the main and sub items required at the time of the oil change. For an explanation of Maintenance Minder
Codes and what service should be performed, refer to the articles under "Maintenance Reminder Service Codes".
Reset the display after completing the required maintenance service. You will see "OIL LIFE 100%" on the display the next time you turn the ignition
switch to the ON (II) position. Refer to the article under "Resetting the Maintenance Minder".
If the indicated maintenance service is not done and the remaining engine oil life reaches 0%, the multi-information display will show the message
"SERVICE PAST DUE" and the maintenance item code(s). This message is displayed when the total mileage is less than 10 miles (for U.S. models)/10
km (for Canadian models) after the engine oil life became 0%.
Perform the service immediately and be sure to reset the oil life minder. Refer to the article under "Resetting the Maintenance Minder".
The message will be canceled if the button with up and down arrow icon on the steering wheel is pressed. Press the button with up and down arrow icon
to see the message again.
Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life minder. The message "SERVICE OIL LIFE", along with "0%"
and the maintenance item code(s) are displayed on the lower part of the multi-information display when the calculated engine oil life is 0 percent. And
also, the percentage "0" keeps blinking on the display
This particular message is displayed when the mileage after the engine oil life became 0% reaches 10 miles (for U.S. models)/10 km (for Canadian
models)
If the indicated required service is not done and the remaining engine oil life becomes 0%, the multi-information display will show a "SERVICE PAST
DUE" message, the total mileage after the remaining oil life became 0%, and the maintenance item code(s).
