RL V6-3.5L (2007)
Odometer: Testing and Inspection
Select/Reset/Information Switch Test/Replacement
1. Remove the driver's airbag assembly.
2. Disconnect the 6P connector (A) from the select/rese/information switch (B).
3. Measure resistance between the select/reset/information switch 6P connector No. 6 and No. 5 terminals in each switch position according to the
table.
4. If the resistance is not as specified, remove the two screws and replace the switch.
5. If the switch is OK, but there is a problem with the switch function, check the steering switches harness and cable reel.