acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest:|09-022|Page 11538 > < Brake Light Switch|Description and Operation
Page 1
background image

Center Mounted Brake Lamp: Customer Interest
Lighting - High Mount Brake Lamp Cover Loose/Falls Off

09-022

July 20, 2010

*Applies To: 
2005-10 RL - ALL*

High Mount Brake Light Cover Is Loose or Falls Off

(Supersedes 09-022, dated June 6, 2009, to revise the information marked with the asterisks)

*REVISION SUMMARY

Under Applies To, 2010 models were added.*

SYMPTOM

The high mount brake light cover is loose or falls off.

PROBABLE CAUSE

The clips on the high mount brake light cover are incorrectly installed.

CORRECTIVE ACTION

Remove the high mount brake light cover, install the clips correctly, then reinstall the cover.

PARTS INFORMATION

Snap Fitting (clip): P/N 90666-SJA-003

WARRANTY CLAIM INFORMATION

The normal warranty applies.

Operation Number:

8570A4

Flat Rate Time:

0.2 hour

Failed Part:

P/N 34273-SJA-000ZC

Defect Code:

08001

Symptom Code:

06101

Skill Level:

Repair Technician

REPAIR PROCEDURE

Customer Interest:|09-022|Page 11538 > < Brake Light Switch|Description and Operation