Drive Belt: Technical Service Bulletins (page 3 of 3)
- Make
- Acura (Honda)
- Model
- RL
- Engine
- V6-3.5L
- Year
- 2007
- Section
- Drive Belt
MaintenanceTechnical Service Bulletins · page 3 of 3
Drive Belt: Service and Repair
Drive Belt Replacement
Special Tools Required
Belt tension release tool Span-on YA9317or equivalent, commercially available.
1. Remove the right upper fender trim.
2. Remove the intake manifold cover.
3. Move the auto-tensioner (A) with the belt tension release tool in the direction shown to relieve tension from the drive belt, then remove the drive
belt.
4. Install the new belt in the reverse order of removal.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2007 Acura RL 3.5L
- PARTOil filterSearch: Acura RL 2007 3.5L oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Acura RL engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.