acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Maintenance Required Lamp/Indicator|Description and Operation|Page 2293 > < Maintenance Required Lamp/Indicator|Description and Operation|Page 2291
Page 4
background image

This message is displayed when you drive over 10 miles (for U.S. models) or 10 km (for Canadian models) after seeing the 0% message.

Perform the service immediately and be sure to reset the display. Refer to the article under "Resetting the Maintenance Minder".

The maximum total mileage shown with this message is "9999 mile" (for U.S. models) or "9999 km" (for Canadian models).

The message will be canceled if the button with up and down arrow icon on the steering wheel is pressed. Press the button with up and down arrow icon
to see the message again.

When you press the SEL/RESET button to select the engine oil life minder, the message "SERVICE", along with the maintenance item code(s) and the
total negative mileage after the oil life became 0 percent life be displayed on the lower part of the multi-information display.

This particular message is displayed when you drive over 10 miles (for U.S. models) or 10 km (for Canadian models) after seeing 0%.

The maximum total negative mileage is "9999 mile" (for U.S. models) or "9999 km" (for Canadian models).

Important Maintenance Precautions

If you perform the required service but do not reset the display, or reset the display with out performing the service, the system will not show the proper 
maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.

Maintenance Required Lamp/Indicator|Description and Operation|Page 2293 > < Maintenance Required Lamp/Indicator|Description and Operation|Page 2291