RL V6-3.5L (2007)
33. Measure voltage between PCM connector terminal E5 and body ground.
Is there battery voltage?
YES - Go to step 40.
NO - Go to step 35.
34. Turn the ignition switch OFF.
35. Remove the left kick panel. Then remove PGM-FI main relay 1 (FI MAIN) (A) from the under-dash fuse/relay box.
36. Measure voltage between PGM-FI main relay 1 (FI MAIN) 4P connector terminal No. 3 and body ground.
Is there battery voltage?
YES - Go to step 37.
NO - Repair open in the wire between the No. 8 FI ECU (PCM) (15 A) fuse and PGM-FI main relay 1 (FI MAIN).
37. Jump the SCS line with the HDS.
38. Disconnect PCM connector E (31P).