RL V6-3.5L (2007)
quick-connect fittings.
Pay attention to the following:
-
The fuel feed hoses, fuel lines, and quick-connect fittings are not heat-resistant; be careful not to damage them during welding or other heat
generating procedures.
-
The fuel feed hoses, fuel lines, and quick-connect fittings are not acid-proof; do not touch them with a shop towel that was used for wiping battery
electrolyte. Replace them if they came into contact with electrolyte or something similar.
-
When connecting or disconnecting the fuel feed hoses, fuel lines, and quick-connect fittings, be careful not to bend or twist them excessively.
Replace them if they are damaged.
A disconnected quick-connect fitting can be reconnected, but the retainer on the mating line cannot be reused once it has been removed from the line.
Replace the retainer when:
-
replacing the fuel rail.
-
replacing the fuel line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the fuel gauge sending unit.
-
it has been removed from the line.
-
it is damaged.
NOTE: When replacing a retainer. use the same size and manufacturer.
