RL V6-3.5L (2007)
Fuel Line/Quick-Connect Fitting Installation
NOTE: Read the "Fuel Line/Quick-Connect Fitting Precautions" before doing this procedure.
1. Check the contact area (A) of the line (B) for dirt or damage, and clean it if needed.
2. Insert a new retainer (A) into the connector (B) if the retainer is damaged, or after:
-
replacing the fuel rail.
-
replacing the fuel feed line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the fuel gauge sending unit.
-
removing the retainer from the line.
