RL V6-3.5L (2007)
6. Disconnect PCM connector E (31P).
7. Check for continuity between ignition coil relay 4P socket terminal No. 3 and body ground.
Is there continuity?
YES - Repair a short in the wire between ignition coil relay 4P socket terminal No. 3 and the PCM (E5).
NO- Go to step 8.
8. Check for continuity between ignition coil relay 4P socket terminal No. 3 and powertrain control module (PCM) connector terminal E5.
Is there continuity?
YES - The system is OK at this time. Check for loose or poor connections at the ignition coil relay and the PCM (E5).
NO- Repair an open in the wire between ignition coil relay 4P socket terminal No. 3 and the PCM (E5).
