RL V6-3.5L (2007)
15. Turn the ignition switch ON (II).
16. Manually input the VIN to the PCM with the HDS.
NOTE: DTC P0630 "VIN Not Programmed or Mismatch" may be stored because the VIN has not been programmed into the PCM, ignore it, and
continue this procedure.
17. If the READ DATA (engine oil life) failed in step 7, Go to step 20. Otherwise, Go to step 18.
18. Select the PGM-FI system with the HDS.
19. Select the REPLACE PCM MENU, then select WRITE DATA and follow the screen prompts.
NOTE: If the WRITE DATA indicates FAILED, continue this procedure.
20. Select IMMOBI system with the HDS.
21. Enter the immobilizer code with the PCM replacement procedure in the HDS, it allows you to start the engine.
22. If the TP POSITION Check failed in step 6, clean the throttle body, then Go to step 23.
23. If the READ DATA failed in step 7 or the WRITE DATA failed in step 19, replace the engine oil and engine oil filter, then Go to step 24.
24. Select PGM-FI system, and reset the PCM with the HDS.
25. Update the PCM if it does not have the latest software.
26. Do the PCM idle learn procedure.
27. Do the CKP pattern learn procedure.
